After logging in with the login link in the top right, click here to upload your Capstone

Capstone Projects

The influence of a common parent on sap sweetness among open pollinated sugar maple (Acer saccharum Marsh.) offspring

Wed, 05/08/2019 - 15:08
Abstract: Beginning in the 1950s, the United States Forest Service began to look into the ability to predict and control the heritability of sap sweetness in sugar maples (Acer saccharum Marsh.). A search for genetically superior (sweeter) trees was conducted across 6 states, testing 21,000 trees. Only 53 trees were chosen to be parental stock for the “Super Sweet” sugar maple improvement program. These trees, cloned through rooted cuttings and scion wood grafting, were planted in the Grand Isle, VT clonal bank. One of the five progeny tests of open pollinated offspring from the clonal bank was established in Lake Placid, New York. These trees had their first evaluation at age ten. Each tree had its diameter and height measured, as well as its sap sweetness tested. Now, 35 years after planting, the trees were evaluated again. An inventory was conducted with diameter at breast height, tree height, and live crown ratio measurements. Of the 725 trees planted, only 396 trees remain. Only 258 trees were of size and quality to handle a 5/16” tap. Their sap sweetness was measured at multiple times though out the season. Knowing one of the two parents of each tree allowed for the comparison of the sap sweetness of the different common-parent groups. The data collected did not support that the knowledge of only one parent could be used to predicts a tree’s sweetness relative to any other parent’s offspring. The bigger picture progeny evaluations will continue the “Super Sweet” sugar maple improvement program.
Access: Yes
Literary Rights: Off
Major: Forestry
Year: 2019
Authors: Eric Mance

White-tailed Deer Browse Preference: A Comparative Study of the Catskill and Adirondack Mountain Regions, New York State

Tue, 05/05/2015 - 14:23
Abstract: Abundant white-tailed deer (Odocoileus virginianus) in New York State, United States, affect forest regeneration and stand composition through feeding (browse) pressure. White-tailed deer browse preference of six different hardwood tree species in two mountain ranges, the Catskill and Adirondack Mountains, within New York State were compared in order to determine the extent of browse selection by deer. There were no statistically different browse selection by white-tailed deer within the Catskills or Adirondack study area or between each study site. Visual analysis of the study areas after concluding the study revealed that red maple (Acer rubrum) was the preferred browse species at each study site.
Access: Yes
Literary Rights: Off
Major: Biology, Natural Resources Management and Policy
Year: 2015
File Attachments: Title, abstract, TOC , Report
Authors: John MacNaught, Blaine Kenyon, Mark Staats, Travis Boucher, Noah Finlayson-Gesten

Student Health Services: A Feasibility Study for Expansion

Thu, 12/03/2015 - 15:20
Abstract: The problem and solution that this study proposes involves Student Health Services. The problem SHS currently faces is that the wait time to see the nurse on campus varies in length and at times it can take longer than a half an hour for the student to be seen. After in depth analysis and discussions with the SHS Director and sole nurse, the solution proposed is to hire a second nurse.
Access: Yes
Literary Rights: Off
Major: Business Management and Entrepreneurial Studies
Year: 2015
Authors: Abigail Bailey

"Adirondack Escapes" - Feasibility Study

Thu, 12/03/2015 - 15:55
Abstract: “Adirondack Escapes”, located on Osgood Pond in Brighton, NY, is a yurt-accommodation that offers an affordable rate and comfort. This accommodation will serve primarily as an overnight stay destination for those who like to visit the Adirondack Park. “Adirondack Escapes” would like to one day expand its guests, and potentially, house college students from the two college in the area.
Access: Yes
Literary Rights: Off
Major: Business Management and Entrepreneurial Studies
Year: 2015
File Attachments: NEW CAPSTONE DEC 3.docx
Authors: Jordan Merry

Topaz Detailing

Wed, 04/29/2015 - 11:21
Abstract: Topaz Detailing plans to be the only mobile detailing presence in the northern Bergen County NJ area that people trust their cars with. Trust us how? Trust us in making their car look as good as or better than the day they drove it off the lot. The service that Topaz Detailing provides uses a very safe paint correction process that has been in used all over the world for many years. The process can be used to correct anything from holograms, swirl marks and shallow scratches in the clear coat of the car caused from daily driving and use of improper materials. Using this method by repeating certain key steps can remove up to 100% of the visible blemishes on the paint can be corrected while making the car look like new. The full paint correction process starts with a basic waterless wash with distilled water and lubricants to get rid of most of the contaminants. Second, the car will be clayed to remove the contaminants were not removed from the first step and that can’t be seen. Third, the car will be compounded with a dual action orbital polisher to remove most of the swirl marks and scratches, this step may be repeated as many times as necessary to achieve desired results. Fourth, the car will be polished with oils; this will give the car (especially darker ones) a high gloss as well as remove very minor swirl marks. Finally, the car will be given two thin protective coats of wax which helps improves appearance as well as act as a barrier that will protect the paint from the elements. This simple process is what automotive detailers around the world use. Short-term goals for Topaz Detailing would be to stay in business and expand our customer base so we can saturate the market in Northern Bergen County and surrounding towns. Long-term goals would be to expand the business and get a garage so detailing can be done in the winter months and on rainy days. Another automotive detailer will be hired to operate the van and still keep our business mobile. What makes Topaz Detailing special: as opposed to the competitors in the area, Topaz Detailing will be run out of a van. This gives the company a few specific advantages A) customers will find it more convenient that the detail shop comes to them B) they will not have to worry about getting the car they need to detail to the shop and find a ride back and C) customer will not have to waste any valuable time getting the car to a shop, we come to you!
Access: Yes
Literary Rights: Off
Major: Business Management and Entrepreneurial Studies
Year: 2015
File Attachments: Topaz Detailing 2.docx
Authors: Karl Schubert

Best Management Practices for Cultivating Cold-Weather Shiitake Strains in the Adirondack North Country

Fri, 05/01/2015 - 09:55
Abstract: Shiitake (Lentinula edodes) cultivation has become an important tool for private woodlot owners to diversify their income and manage their woodlots more efficiently and sustainably. Through the art and science of mushroom cultivation three strains of shiitake have been created for varying climates: Wide Range (WR), Warm Weather (WW), and Cold Weather (CW). This study proposes that CW strains would be most ideal for the Adirondack North Country because growing conditions now and in the future are nearly optimal. CW strains have a shorter fruiting period (spring and fall) than the WR and WW; therefore, the mushroom production potential of the CW is underutilized. In order to get maximum production of their logs, most growers use a method called shocking to induce fruiting with WR and WW; however, research has shown that shocking does not trigger fruiting in the CW strains; rather, CW strains respond to temperature fluctuations. Taking this into account, we’ve introduced a hybrid approach of growing CW shiitake, which combines outdoor and indoor cultivation techniques to best imitate that temperature fluctuation. Growing CW shiitake using a hybrid approach can be the best choice for small-scale growers who wish to extend their growing season into the winter months, thus opening new market opportunities. By conducting interviews with shiitake growers in similar climates and compiling and analyzing literature from other professionals, we have gathered data on log harvesting, laying yard conditions, moisture management, and lighting conditions and developed a best management practices guide for small-scale shiitake grower/woodlot owners in a northern Adirondack climate. Ultimately, growers could diversify their sources of income, provide incentive to manage their woodlots and most importantly learn how to effectively utilize CW strains through the winter months.
Access: Yes
Literary Rights: Off
Major: Environmental Studies, Forestry
Year: 2015
Authors: Brittney E. Bell, Evan M. White

Predicting the amount of usable lumber contained in American beech (Fagus grandifolia) logs infected with beech bark disease based on exterior defects.

Wed, 12/02/2015 - 10:09
Abstract: Beech Bark disease has had many effects on the hardwood forests of the northeastern United States. Many studies have been done in regards to the changes caused by the disease affecting the ecology, species composition of the forest, abundance of American beech (Fagus grandifolia), and physiology of individual trees. However, American beech is a dense, strong species that machines and bends well, and has uses in the form of flooring, handles, and some furniture. This study examines how the severity of beech bark disease affects the amount of usable lumber that can be recovered from American beech sawlogs. To do this, American beech sawlogs with varying degrees of beech bark disease infection were harvested, bucked and scaled. These logs were rated according to their degree of beech bark disease infection based on exterior defects such as raised or sunken cankers, fissures and evidence of scale insect. These logs were then sawn into lumber form and rescaled to find a percentage of usable lumber that resulted from the gross scale taken prior to sawing. There was not a definitive relationship between degree of infection, and lumber yield. This study will be useful to the stakeholders of the lumber industry to aid in predicting whether or not a log infected with beech bark disease can be economically used for lumber.
Access: Yes
Literary Rights: Off
Major: Forestry
Year: 2015
Authors: Alex Cote, Zachary Smith

Vermont Maple Forest Products LLC. Forest Management and Business Plan

Wed, 12/02/2015 - 17:52
Abstract: Maple syrup production is an extremely important aspect of the American economy in the northeast, generating around 132 million dollars in revenue annually across its U.S production range (United States Department of Agriculture, 2014). At the current rate of production U.S producers are presently only tapping 0.4% of the maples which may be available (Farrell & Chabot, 2012). Vermont has the greatest number of its trees tapped, with 2.94% of available trees currently in production. The low percentage of tappable maple trees in production has been seen as a short coming in the industry. However, this does create the possibility for entry into the industry. Vermont Maple Forest Products LLC is in current maple production and desires to produce on an industrial scale. Simon Boulet and Claude Deschenes (2005) found that the highest degrees of profit are generated when a producer is considered a medium(5,000-19,000 taps)-large (>19,000 taps) supplier. At this point costs per tap are reduced and sap yeilds increase. Vermont Maple Forest Products currently has the land available for potentially over 28,000 taps. To achieve this goal a business plan and forest management plan was developed and will be implemented across the tract with the goal of maple syrup production.
Access: Yes
Literary Rights: Off
Major: Forestry
Year: 2015
Authors: Adam D Allen

Investigating Amount of Sample Points Necessary for Accurate Topographic Representation of the Ground Truth

Wed, 04/29/2015 - 18:18
Abstract: Topographic or elevation data has many uses and applications especially when it is converted into a Digital Elevation Model (DEM). Such uses are erosion modeling, surface hydrology, watershed modelling geomorphology, land-sliding, agriculture and ecosystem modeling to list a few examples. This project intends to determine the amount of topographic data points that need to be collected in order to create an accurate model of the ground topography. To accomplish the objective, a topographic survey was conducted on a grid pattern, with a spacing of 7.5 feet between points regularly spaced over one acre. After the data were collected, varying percentages of the total amount of points collected were removed and the resulting digital elevation model (DEM) was compared to the ground truth DEM. When comparing accuracy of interpolated elevation across the entire DEM with a RMSE (root mean square error) it was found that using a subset of 25-30% of the entire data set were needed to create a model that did not significantly differ from the Ground Truth. The change in volume of the elevation surface compared to the Ground Truth results in a linear relationship, as more points are added the closed the change in volume is to zero. The P value derived from the T-test of the mean elevations of the trial DEM’s and the Ground truth, reflect the results from the change in volume, as more points are added the closer to the truth the DEM becomes.
Access: Yes
Literary Rights: On
Major: Forestry
Year: 2015
File Attachments: Final_Report_RGM.docx
Authors: Ryan McGowan

Implementing an Educational Demonstration Forest with Working Elements of Silviculture, Wildlife, Recreation, and Water in Harrietstown, Adirondack, NY

Tue, 05/05/2015 - 11:15
Abstract: The project being conducted will provide rationale about the importance of working forestry, all while maintaining positive public sentiment within the forest products industry. The project will focus on public education and maintain water quality, wildlife habitat, and recreational opportunities. The public will see developed interpretive areas with signage at points of interest. The designated area is located near the Adirondack Regional Airport, Hunt Road and NYS Route 30, and is comprised of 226 acres. There are varying stands in the tract that range from pure softwood, hardwood and mixed wood stands. After the designated area was selected, a timber cruise was conducted along with note taking and visual analysis of how the area could entice public use and education. Once all the data was gathered, the conclusion drawn was throughout all different forests types in the tract, there were multiple educational opportunities pertaining to water quality and wildlife habitat through use of sustainable forestry methods. The significance of this project is to facilitate public education on how forestry can be sustainable and beneficial. This will be shown through workshops, kiosks, interpretive walks and a menagerie of other proposed ideas.
Access: Yes
Literary Rights: On
Major: Forestry
Year: 2015
File Attachments: Capstone_LIB_Upload.docx
Authors: Jeffrey Bigelow, Raymond Desilva, William Lehning, Llewellyn Palmer, Bennett Lohmeyer, Corey Bulson