After logging in with the login link in the top right, click here to upload your Capstone

Capstone Projects

A Comparison Study of Adirondack Region Clearcutting Implementation to that of Paul Smith’s College VIC FERDA Plots

Mon, 05/02/2016 - 10:44
Abstract: The students of Paul Smith’s College have a unique opportunity to explore the parameters of silviculture and forestry practices. Gaining the base knowledge of silvicultural systems while also, properly implementing timber harvesting methods in order to achieve the specific goals and objectives of these systems is tremendously useful for implementation in future years. This study investigated the silvicultural prescriptions of the Forest Ecosystem Research and Demonstration Area (FERDA) plots on Paul Smith’s College lands, in Paul Smiths, New York. Comparing the inventory of the two clearcut sites upon these lands to that of other harvests within the Adirondack Park can supply further knowledge on what can be expected after a specific silvicultural system. Clearcutting has the greatest effect on forest succession by removing the forest cover and allowing light to reach what was once a shaded forest floor. Comparing experimental five acre clearcuts to that of larger commercial clearcuts in the same region can further our understanding of regeneration composition after such timber harvesting operations occur. The variance between the age of the FERDA plot harvests and the age of the harvests completed on Landvest timberlands resulted in varying data. However, if four to eight more years was given for pseudo FERDA plots to mature, it is believed that these harvests would be similar in composition and structure.
Access: No
Literary Rights: On
Major: Forestry
Year: 2016
File Attachments: The Author has selected not to publish this complete work.
Authors: Ryan Krzys, Louis Ferrone III

Growth of Black Spruce and Tamarack in Response to Abiotic Variables

Tue, 05/03/2016 - 12:46
Abstract: The growth of black spruce (Picea mariana) and tamarack (Larix laricina) was examined in relation to the potential influences of pH, dissolved oxygen, conductivity, water temperature, proportion of canopy closure and depth to ground water in a northern Adirondack peatland ecosystem. 42 plots were constructed in a sphagnum dominated wetland and sampled for the above abiotic variables throughout the summer and fall of 2015. Heights, ages and periodic annual increment of 26 tamarack and 23 black spruce samples were determined in February and March of 2016. An age to height ratio and periodic annual increment for each species was then regressed against the above abiotic variable data in order to determine any influence of these data on growth rates of the conspecifics. Results show that depth to water table and increased exposure to light had a significantly positive relationship with the age to height ratio of tamarack. Periodic annual increment of tamarack had a significant positive relationship with decreasing light exposure. Black spruce’s age to height ratio had a significant positive relationship with dissolved oxygen (mg/L).
Access: Yes
Literary Rights: Off
Major: Forestry
Year: 2016
Authors: Robert DeSotle

Outward Bound semester: Skills to last a life time

Wed, 12/14/2016 - 10:44
Abstract: The focus of this study will examine the level at which an Outward Bound semester fosters personal growth, connection with nature, and hard skills. This particular Outward Bound semester course traveled from the Florida Keys then on to Costa Rica and Panama in Central America. The course focused on the water elements of sailing, surfing, whitewater rafting, scuba diving, and sea kayaking. Methods used include personal journal reflections, peer and instructors oral and written responses. The researcher was an active participant in the immersive experience and kept a journal of the entire experience trying to gather as much information about the course itself and reflecting on the research process throughout. This research indicated that this experience developed personal character and a connection with nature. These skills have an impact deeper than an isolated course with Outward Bound but can be transferred to daily life.
Access: Yes
Literary Rights: Off
Major: Recreations, Adventure Travel and Ecotourism, Recreation, Adventure Education and Leisure Management, Parks, Recreation and Facilities Management
Year: 2016
Authors: Sam Annable

Student Health Services: A Feasibility Study for Expansion

Thu, 12/03/2015 - 15:20
Abstract: The problem and solution that this study proposes involves Student Health Services. The problem SHS currently faces is that the wait time to see the nurse on campus varies in length and at times it can take longer than a half an hour for the student to be seen. After in depth analysis and discussions with the SHS Director and sole nurse, the solution proposed is to hire a second nurse.
Access: Yes
Literary Rights: Off
Major: Business Management and Entrepreneurial Studies
Year: 2015
Authors: Abigail Bailey

"Adirondack Escapes" - Feasibility Study

Thu, 12/03/2015 - 15:55
Abstract: “Adirondack Escapes”, located on Osgood Pond in Brighton, NY, is a yurt-accommodation that offers an affordable rate and comfort. This accommodation will serve primarily as an overnight stay destination for those who like to visit the Adirondack Park. “Adirondack Escapes” would like to one day expand its guests, and potentially, house college students from the two college in the area.
Access: Yes
Literary Rights: Off
Major: Business Management and Entrepreneurial Studies
Year: 2015
File Attachments: NEW CAPSTONE DEC 3.docx
Authors: Jordan Merry

Topaz Detailing

Wed, 04/29/2015 - 11:21
Abstract: Topaz Detailing plans to be the only mobile detailing presence in the northern Bergen County NJ area that people trust their cars with. Trust us how? Trust us in making their car look as good as or better than the day they drove it off the lot. The service that Topaz Detailing provides uses a very safe paint correction process that has been in used all over the world for many years. The process can be used to correct anything from holograms, swirl marks and shallow scratches in the clear coat of the car caused from daily driving and use of improper materials. Using this method by repeating certain key steps can remove up to 100% of the visible blemishes on the paint can be corrected while making the car look like new. The full paint correction process starts with a basic waterless wash with distilled water and lubricants to get rid of most of the contaminants. Second, the car will be clayed to remove the contaminants were not removed from the first step and that can’t be seen. Third, the car will be compounded with a dual action orbital polisher to remove most of the swirl marks and scratches, this step may be repeated as many times as necessary to achieve desired results. Fourth, the car will be polished with oils; this will give the car (especially darker ones) a high gloss as well as remove very minor swirl marks. Finally, the car will be given two thin protective coats of wax which helps improves appearance as well as act as a barrier that will protect the paint from the elements. This simple process is what automotive detailers around the world use. Short-term goals for Topaz Detailing would be to stay in business and expand our customer base so we can saturate the market in Northern Bergen County and surrounding towns. Long-term goals would be to expand the business and get a garage so detailing can be done in the winter months and on rainy days. Another automotive detailer will be hired to operate the van and still keep our business mobile. What makes Topaz Detailing special: as opposed to the competitors in the area, Topaz Detailing will be run out of a van. This gives the company a few specific advantages A) customers will find it more convenient that the detail shop comes to them B) they will not have to worry about getting the car they need to detail to the shop and find a ride back and C) customer will not have to waste any valuable time getting the car to a shop, we come to you!
Access: Yes
Literary Rights: Off
Major: Business Management and Entrepreneurial Studies
Year: 2015
File Attachments: Topaz Detailing 2.docx
Authors: Karl Schubert

Best Management Practices for Cultivating Cold-Weather Shiitake Strains in the Adirondack North Country

Fri, 05/01/2015 - 09:55
Abstract: Shiitake (Lentinula edodes) cultivation has become an important tool for private woodlot owners to diversify their income and manage their woodlots more efficiently and sustainably. Through the art and science of mushroom cultivation three strains of shiitake have been created for varying climates: Wide Range (WR), Warm Weather (WW), and Cold Weather (CW). This study proposes that CW strains would be most ideal for the Adirondack North Country because growing conditions now and in the future are nearly optimal. CW strains have a shorter fruiting period (spring and fall) than the WR and WW; therefore, the mushroom production potential of the CW is underutilized. In order to get maximum production of their logs, most growers use a method called shocking to induce fruiting with WR and WW; however, research has shown that shocking does not trigger fruiting in the CW strains; rather, CW strains respond to temperature fluctuations. Taking this into account, we’ve introduced a hybrid approach of growing CW shiitake, which combines outdoor and indoor cultivation techniques to best imitate that temperature fluctuation. Growing CW shiitake using a hybrid approach can be the best choice for small-scale growers who wish to extend their growing season into the winter months, thus opening new market opportunities. By conducting interviews with shiitake growers in similar climates and compiling and analyzing literature from other professionals, we have gathered data on log harvesting, laying yard conditions, moisture management, and lighting conditions and developed a best management practices guide for small-scale shiitake grower/woodlot owners in a northern Adirondack climate. Ultimately, growers could diversify their sources of income, provide incentive to manage their woodlots and most importantly learn how to effectively utilize CW strains through the winter months.
Access: Yes
Literary Rights: Off
Major: Environmental Studies, Forestry
Year: 2015
Authors: Brittney E. Bell, Evan M. White

Predicting the amount of usable lumber contained in American beech (Fagus grandifolia) logs infected with beech bark disease based on exterior defects.

Wed, 12/02/2015 - 10:09
Abstract: Beech Bark disease has had many effects on the hardwood forests of the northeastern United States. Many studies have been done in regards to the changes caused by the disease affecting the ecology, species composition of the forest, abundance of American beech (Fagus grandifolia), and physiology of individual trees. However, American beech is a dense, strong species that machines and bends well, and has uses in the form of flooring, handles, and some furniture. This study examines how the severity of beech bark disease affects the amount of usable lumber that can be recovered from American beech sawlogs. To do this, American beech sawlogs with varying degrees of beech bark disease infection were harvested, bucked and scaled. These logs were rated according to their degree of beech bark disease infection based on exterior defects such as raised or sunken cankers, fissures and evidence of scale insect. These logs were then sawn into lumber form and rescaled to find a percentage of usable lumber that resulted from the gross scale taken prior to sawing. There was not a definitive relationship between degree of infection, and lumber yield. This study will be useful to the stakeholders of the lumber industry to aid in predicting whether or not a log infected with beech bark disease can be economically used for lumber.
Access: Yes
Literary Rights: Off
Major: Forestry
Year: 2015
Authors: Alex Cote, Zachary Smith

Vermont Maple Forest Products LLC. Forest Management and Business Plan

Wed, 12/02/2015 - 17:52
Abstract: Maple syrup production is an extremely important aspect of the American economy in the northeast, generating around 132 million dollars in revenue annually across its U.S production range (United States Department of Agriculture, 2014). At the current rate of production U.S producers are presently only tapping 0.4% of the maples which may be available (Farrell & Chabot, 2012). Vermont has the greatest number of its trees tapped, with 2.94% of available trees currently in production. The low percentage of tappable maple trees in production has been seen as a short coming in the industry. However, this does create the possibility for entry into the industry. Vermont Maple Forest Products LLC is in current maple production and desires to produce on an industrial scale. Simon Boulet and Claude Deschenes (2005) found that the highest degrees of profit are generated when a producer is considered a medium(5,000-19,000 taps)-large (>19,000 taps) supplier. At this point costs per tap are reduced and sap yeilds increase. Vermont Maple Forest Products currently has the land available for potentially over 28,000 taps. To achieve this goal a business plan and forest management plan was developed and will be implemented across the tract with the goal of maple syrup production.
Access: Yes
Literary Rights: Off
Major: Forestry
Year: 2015
Authors: Adam D Allen

Investigating Amount of Sample Points Necessary for Accurate Topographic Representation of the Ground Truth

Wed, 04/29/2015 - 18:18
Abstract: Topographic or elevation data has many uses and applications especially when it is converted into a Digital Elevation Model (DEM). Such uses are erosion modeling, surface hydrology, watershed modelling geomorphology, land-sliding, agriculture and ecosystem modeling to list a few examples. This project intends to determine the amount of topographic data points that need to be collected in order to create an accurate model of the ground topography. To accomplish the objective, a topographic survey was conducted on a grid pattern, with a spacing of 7.5 feet between points regularly spaced over one acre. After the data were collected, varying percentages of the total amount of points collected were removed and the resulting digital elevation model (DEM) was compared to the ground truth DEM. When comparing accuracy of interpolated elevation across the entire DEM with a RMSE (root mean square error) it was found that using a subset of 25-30% of the entire data set were needed to create a model that did not significantly differ from the Ground Truth. The change in volume of the elevation surface compared to the Ground Truth results in a linear relationship, as more points are added the closed the change in volume is to zero. The P value derived from the T-test of the mean elevations of the trial DEM’s and the Ground truth, reflect the results from the change in volume, as more points are added the closer to the truth the DEM becomes.
Access: Yes
Literary Rights: On
Major: Forestry
Year: 2015
File Attachments: Final_Report_RGM.docx
Authors: Ryan McGowan